正河源 SFB定位块

　　特点

　　1.定位块需要配合定位梢形式购买。

　　2.购买SFB-1的定位块为素材，客户可自行加工为机台所需之形式。

　　3.定位块可以装置在轴上，但要固定在机器上，才不会妨碍到ATC臂，固定方法因机台而异，因此，装置前应询问机器制造商其适合的定位块装置方法。

　　4.接受特殊规格定制，下单之前请详细提供并填写相关尺寸，填写表在P.39.

　　Features

　　1.Applicable For Oil Hole Holder And Angle Head Holder.

　　2.SFB-1 Fixed by themselves to fit the machines.

　　3.The fixed block can be installed on the spindle,but it must be fastened on the machines,so that it won'tinterfere different machine,before installation,it's necessary consult the machine manufacturers about the correct installation methods.

　　4.Specisl type is accepted.Before making a purchase order,please informed detailed dimen sions by filling out the form in P.39.

　　订制时请注意主轴中心与定位块孔中心的间距的变动，并指明您机器主轴法兰上的固定螺丝孔尺寸位置。

　　If you'd like custom-made,please beware of the distance between spindle center and Fixed Block center.Also,please indicate the dimension and position of the Fixed Screw on the flange of spindle.

　　下单之前，请详细提供并填写相关尺寸，透过电子邮件，电话或者传真与我们联系。

　　Before making a purchase order,please inform detailed dimensions.Please contact us by e-mail,phone or fax.

　　*为必填的尺寸

　　The dimension with * is necessary to fill in completely.

　　S=主轴中心到定位块的中心距离

　　The distance between the center of spindle and the center of fixed block.